Usb/Rs-485 Communication Interface Ifd6530 - Delta VFD-ED Series User Manual

Chapter 6 Optional Accessories | VFD-ED

6-8 USB/RS-485 Communication Interface IFD6530

Warning
 Thoroughly read this instruction sheet before installation and putting it into use.
 The content of this instruction sheet and the driver file may be revised without prior notice. Consult our
distributors or download
Introduction
IFD6530 is a convenient RS-485-to-USB converter that does not require an external power supply and a
complex setting process. It supports baud rates from 75 to 115.2 kbps and auto-switching of the data
transmission direction. In addition, it adopts the RJ45 in RS-485 connector for convenient wiring. Its
small size, use of plug-and-play and hot-swappable provide more conveniences for connecting all DELTA
IABG products to your PC.
Applicable Models: All DELTA IABG products.
 Application & Dimension:
Specifications
Power supply
Power consumption
Isolated voltage
Baud rate
RS-485 connector
USB connector
Compatibility
Maximum cable length
Supports RS-485 half-duplex transmission
the most updated instruction/driver version.
Figure 6-44
No external power is required.
1.5 W
2,500 V
DC
75, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
RJ45
A type (plug)
Full compliance with USB V2.0 specification
RS-485 communication port: 100 m
6-52
Figure 6-45
Table 6-43