Response Delay Time; Main Frequency Of The Communication - Delta C2000 series User Manual

~ Reserved

Response Delay Time

Settings 0.0~200.0ms
This parameter is the response delay time after AC drive receives communication command as
shown in the following.
RS-485 BUS
PC or PLC command

Main Frequency of the Communication

Settings 0.00~600.00Hz
When Pr.00-20 is set to 1 (RS485 communication). The AC motor drive will save the last
frequency command into Pr.09-10 when abnormal turn-off or momentary power loss. After reboots
the power, it will regards the frequency set in Pr.09-10 if no new frequency command is inputted.
Block Transfer 1
Block Transfer 2
Block Transfer 3
Block Transfer 4
Block Transfer 5
Block Transfer 6
Block Transfer 7
Block Transfer 8
Block Transfer 9
Block Transfer 10
Block Transfer 11
Block Transfer 12
Block Transfer 13
Block Transfer 14
Block Transfer 15
Block Transfer 16
Settings 0~65535
There is a group of block transfer parameter available in the AC motor drive (Pr.09-11 to Pr.09-20).
User can use them (Pr.09-11 to Pr.09-20) to save those parameters that you want to read.
Chapter 12 Description of Parameter Settings|C2000 Series
Handling time
Response Delay Time
of the AC drive
Pr.09-09
12-143
Factory Setting: 2.0
Response Message
of the AC Drive
Factory Setting: 60.00
Factory Setting: 0