Delta C2000 series User Manual page 487

Classical field oriented. control ac motor drive

Hide thumbs Also See for C2000 series:

Table of Contents

operand. ≦No. of D

must select same device type

Please refer to the specification of each model series

for applicable range of the device.

: Start device of the range to be reset

E xplanation

1. When X0 = On, auxiliary relays M300 ~ M399 will be reset to Off.

2. When X1 = On, 16 counters C0 ~ C127 will all be reset (writing in 0; contact

and coil being reset to Off).

3. When X10 = On, timers T0 ~ T127 will all be reset (writing in 0; contact and coil

being reset to Off).

4. When X3 = On, data registers D0 ~ D100 will be reset to 0.

Devices, e.g. bit devices Y, M, S and Word Devices T, C, D, can use RST

instruction.

API 16 FMOV instruction is also to send K0 to Word Devices T, C, D or bit

registers KnY, KnM, KnS for reset.

Word Devices

H KnX KnY KnM T

, only operands designated by D

Chapter 16 PLC Function |C2000 Series

16-bit command (5 STEPS)

32-bit command

Flag signal: none

: End device of the range to be reset

will be reset.

Show Quick Links

Table of Contents