Chapter 3 Unpacking - Delta C2000 series User Manual

The AC motor drive should be kept in the shipping carton or crate before installation. In order to retain the
warranty coverage, the AC motor drive should be stored properly when it is not to be used for an
extended period of time.
The AC motor drive is packed in the crate. Follows the following step for unpack:
Frame D
Crate 1 (VFDXXXCXXA)
Loosen the 12 cover screws to open the crate.
Remove the EPEs and manual.
Loosen the 8 screws that fastened on the pallet
and remove the wooden plate.
Chapter 3 Unpacking|C2000 Series

Chapter 3 Unpacking

Crate 2 (VFDXXXCXXE)
Loosen the 4 screws on the iron plates. There are 4
iron plates and in total of 16 screws.
Remove the crate cover, EPEs, rubber and
manual.
3-1