Frame D&E - Delta C2000 series User Manual

Chapter 7 Optional Accessories |C2000 Series
Frame D&E
1. Loosen 8 screws and remove Fixture 2 (as shown in
the following figure).
3. Fasten 4 screws (as shown in the following figure).
Screw torque: 30~32kg-cm (26.0~27.8Ib-in).
5. Fasten 4 screws (as shown in the following figure).
Screw torque: 24~26kg-cm (20.8~22.6Ib-in).
7. Place 4 screws (M10) through Fixture 1&2 and the
plate then fasten the screws. (as shown in the
following figure)
Screw torque: 200~240kg-cm (173.6~208.3Ib-in).
2. Loosen 10 screws and remove Fixture 1 (as shown
in the following figure).
4. Fasten 5 screws (as shown in the following figure).
Screw torque: 30~32kg-cm (26.0~27.8Ib-in).
6. Fasten 5 screws (as shown in the following figure).
Screw torque: 24~26kg-cm (20.8~22.6Ib-in).
7-40