6-8 USB/RS-485 Communication Interface IFD6530
Warning
Read this section thoroughly before installing and using the interface.
This section and the driver file may be revised without prior notice. Consult our distributors or download
the most updated instruction/driver version at
http://www.delta.com.tw/product/em/control/cm/control_cm_main.asp.
Introduction
IFD6530 is a convenient RS-485-to-USB converter that does not require an external power supply and a
complex setting process. It supports baud rates from 75 to 115.2 kbps and auto-switching of the data
transmission direction. In addition, it adopts the RJ45 in RS-485 connector for convenient wiring. Its small
size, use of plug-and-play and hot-swappable provide more conveniences for connecting all DELTA IABG
products to your PC.
Applicable Models: All DELTA IABG products.
Application & Dimension:
Specifications
Power supply
Power consumption
Isolated voltage
Baud rate
RS-485 connector
USB connector
Compatibility
Maximum cable length
Supports RS-485 half-duplex transmission
No external power is needed.
1.5 W
2,500 V
DC
75, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
RJ45
A type (plug)
Full compliance with USB V2.0 specification
RS-485 communication port: 100 m
6-51
06 Optional Accessories | VFD-ED