Descriptions Of Digital Keypad; Descriptions Of Keypad Functions; Chapter 10 Digital Keypad - Delta C2000 series User Manual

10-1 Descriptions of Digital Keypad

KPC-CC01

Descriptions of Keypad Functions

Key
Start Operation Key
1.
2.
3.
4.
Stop Command Key. This key has the highest processing priority in any situation.
1.
2.
Operation Direction Key
1.
2.
ENTER Key
Press ENTER and go to the next level. If it is the last level then press ENTER to execute the command.
ESC Key
ESC key function is to leave current menu and return to the last menu. It is also functioned as a
return key in the sub-menu.

Chapter 10 Digital Keypad

10-1 Descriptions of Digital Keypad
10-2 Function of Digital Keypad KPC-CC01
10-3 TPEditor Installation Instruction
10-4 Fault Code Description of Digital Keypad KPC-CC01
KPC-CE01(Option)
It is only valid when the source of operation command is from the keypad.
It can operate the AC motor drive by the function setting and the RUN LED will be ON.
It can be pressed again and again at stop process.
When enabling "HAND" mode, it is only valid when the source of operation command is
from the keypad.
When it receives STOP command, no matter the AC motor drive is in operation or stop
status, the AC motor drive needs to execute "STOP" command.
The RESET key can be used to reset the drive after the fault occurs. For those faults that
can't be reset by the RESET key, see the fault records after pressing MENU key for
details.
This key is only control the operation direction NOT for activate the drive. FWD: forward,
REV: reverse.
Refer to the LED descriptions for more details.
Chapter 10 Digital Keypad
Communication Interface
RJ-45 (socket)、RS-485 interface;
Installation Method
Embedded type and can be put flat on the surface
of the control box. The front cover is water proof.
Descriptions
10-1
|C2000