Delta C2000 series User Manual page 313

Settings 0000h~FFFFh
Status of Multi-function Output Terminal at Malfunction
Settings 0000h~FFFFh
When malfunction occurs, user can check the status of multi-function input/output terminals. If it
happens again, it will overwrite the previous record.
Drive Status at Malfunction
Settings 0000H~FFFFh
When malfunction occurs, please check the drive status (communication address 2119H). If
malfunction happens again, the previous record will be overwritten by this parameter.
Reserved
Reserved
Treatment to Output Phase Loss Detection (OPHL)
Settings 0: Warn and keep operating
1: Warn and ramp to stop
2: Warn and coast to stop
3: No warning
Pr.06-45 defines how the drive will operates when output phase loss occur.
Deceleration Time of Output Phase Loss
Settings 0.000~65.535 sec
Current Bandwidth
Settings 0.00~655.35%
DC Brake Time of Output Phase Loss
Settings 0.000~65.535 sec
Reserved
Time for Input Phase Loss Detection
Settings 0.00~600.00 sec
Reserved
Chapter 12 Description of Parameter Settings|C2000 Series
12-106
Factory Setting: Read only
Factory Setting: Read only
Factory Setting: 3
Factory Setting:0.500
Factory Setting:1.00
Factory Setting:0.000
Factory Setting:0.20