Zero-Speed Level Of Motor; Switch The Delay Time Of Max. Output Frequency - Delta C2000 series User Manual

Zero-speed Level of Motor

Settings 0~65535 rpm
This parameter should be used with the multi-function output terminals (set to 43). It needs to be
used with PG cared and motor with encoder feedback.
This parameter is used to set the level of motor zero-speed. When the actual speed is lower than
this setting, the corresponding multi-function output terminal 43 will be ON as shown as follows.
a ctua l mo tor
sp ee d
0 2-47
MO =d 43
Max. Frequency of Resolution Switch
Settings 0.01~600.00Hz

Switch the delay time of Max. output frequency

Settings 0.000~65.000 sec
It is used to improve the unstable speed or unstable position due to the insufficient of analog
resolution. It needs to be used with external terminal (set to 43). After setting this parameter, it
needs to adjust the analog output resolution of controller simultaneously by this setting.
AUI +10V
AUI 0V
Max. output frequency
01-00
AUI - 10V
F requenc y
command
Output
frequency
0Hz
Delay t ime f or max .
frequency switch
Resolut ion
10-24
switch
MI=43
Chapter 12 Description of Parameter Settings|C2000 Series
Acc el./ Decel. time
01-12~01-19
Resolution switch
frequency
10-25
F or war d r unni ng
12-50
Factory Setting: 0
Factory Setting: 60.00
Factory Setting: 0.000
Max. output frequency
01-00
Resolution switch
frequency
10-25
ON
Revers e running
Ti me
Delay time for max .
frequency swit ch
10-24