Main Page; Pc Link - Delta C2000 series User Manual

12. Main page

Main Page
1.Default
2.User define
Press to select.
ENTER

13. PC Link

PC Link
Press "ENTER"
to link
Select 1 and press ENTER
PC Link
Waiting
28%
Select 2 and press ENTER
1. Default page
Default picture and editable picture are available upon selection.
60.00Hz
F
H 0.00Hz
A 0.00
F 600.00Hz >>> H >>> A >>> U (circulate)
2. User defined: optional accessory is require (TPEditor & USB/RS-485
Communication Interface-IFD6530)
Install an editing accessory would allow users to design their own start-up
page.If editor accessory is not installed, "user defined" option will dispay a
blank page.
USB/RS-485 Communication Interface-IFD6530
Please refer to Chapter 07 Optional Acessories for more detail.
TPEditor
TPEditor Installation Instruction is on page 10-15 and TPEditor V1.30.6 is
available for download at:
http://www.delta.com.tw/ch/product/em/download/download_main.asp?act
=3&pid=1&cid=1&tpid=3
The function of PC Link is to establish a connection with computer to
download the page for user defined editing. After enter to PC Link page,
check if the connection of KPC-CC01 and computer is successfully establish,
then press enter to go to next page and wait for communication response.
1. If the connection failed, the screen will show "Time Out".
2. If the connection succeeds, the screen page will show "Downloading".
When the download is done, it returns to MENU page.
3. In order to set the start-up page and main page in the format user
defined, user must check the user define option for start-up page and
main page. If the user define page for editing has not yet downloaded to
KPC-CC01, the start-up page and main page will display as blank.
10-13
Chapter 10 Digital Keypad
PC Link
Time Out
Press "ESC"back
to MENU
PC Link
Downloading
28%
|C2000