Delta C2000 series User Manual page 353

Chapter 12 Description of Parameter Settings|C2000 Series
CANopen Control Status
Settings
Reset CANopen Index
Settings: bit0: reset address 20XX to 0.
Reserved
CANopen Master Function
Settings
CANopen Master Address
Settings
~
Reserved
Identifications for Communication Card
Settings
5: Stop State
0: Not ready for use state
1: Inhibit start state
2: Ready to switch on state
3: Switched on state
4: Enable operation state
7: Quick stop active state
13: Err reaction activation state
14: Error state
bit1: reset address 264X to 0
bit2: reset address 26AX to 0
bit3: reset address 60XX to 0
0: Disable
1: Enable
1~127
0: No communication card
1: DeviceNet Slave
2: Profibus-DP Slave
3: CANopen Slave/Master
12-146
Factory Setting: Read Only
Factory Setting: 65535
Factory Setting: 0
Factory Setting: 100
Factory Setting: ##