Show History - D-Link DXS-1210-12TC Reference Manual

EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Executing this command will return access to the highest mode in the CLI hierarchy regardless of
what configuration mode or configuration sub-mode currently located at.
Example
This example shows how to end the Interface Configuration Mode and go back to the Privileged
EXEC Mode.
Switch# configure terminal
Switch(config)# interface eth 1/0/1
Switch(config-if)#end
Switch#
2-5 exit
This command is used to end the configuration mode and go back to the last mode. If the current
mode is the User EXEC Mode or the Privilege EXEC Mode, executing the exit command logs you out
of the current session.
exit
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to exit the current configuration mode and go back to the last mode. When the
user is in the User EXEC Mode or the Privilege EXEC Mode, this command will logout the session.
Example
This example shows how to exit from the Interface Configuration Mode and return to the Global
Configuration Mode.
Switch# configure terminal
Switch(config)interface eth 1/0/1
Switch(config-if)#exit
Switch(config)#

2-6 show history

This command is used to list the commands entered in the current EXEC Mode session.
DXS-1210 Series Smart Managed Switch CLI Reference Guide
13