Measurement Results; Table 7-59 Tsa > Project > Test > Measurement > Settings > Result (Bar Chart) Menu - Keysight U8903B User Manual

Measurement Results

The test sequence application allows you to display the measurement results in a bar chart
or graph.
Bar chart
An example of the bar chart result menu page is displayed as shown in Figure 7-61.
Figure 7-61
Table 7-59 TSA > Project > Test > Measurement > Settings > Result (bar chart) menu description
Menu Description
Enable Press the Enable softkey to enable or disable the selected result tab.
Add Resul t Press the Add Resul t softkey to add a new result tab to the measurement.
Delete Result Press the Delete Result softkey to delete the selected result tab from the measurement.
Press the Save Data softkey to save the selected result data to a CSV file format in the internal storage or external USB
Save Data
flash storage. Refer to "Save" on page
Keysight U8903B User's Guide
AC Level > Settings > Result (AC level) menu page
94 for the Save menu page.
Test Sequence Application 7
399