Table A-21 Measurement Settings > Crosstalk Menu Tree Description - Keysight U8903B User Manual

Crosstalk
Table A-21 Measurement settings > Crosstalk menu tree description
Tab Level 1
Waveform
Output
Crosstalk
(Signal Generation)
Waveform Config
Driven Ch
Freq Lock
Fund Freq
Crosstalk
(Signal Analysis)
Sample Size
Input Range
Input Range
Crosstalk
Keysight U8903B User's Guide
Level 2 Level 3
– Sine
– Arbitrary
– Enable
Track 1st Ch
– Disable
Frequency
Amplitude
DC Offset
– Auto
– Gen Lock
– Custom
– 2048
– 4096
– 8192
– 16384
– 32768
– 65536
– 131072
– 262144
– 524288
– 1M
– 2M
– On
Auto Range
– Off
– Enable
Track 1st Ch
– Disable
Voltage Range
Appendixes
Description
Select the waveform type.
Select the output channel.
Enable or disable the tracking of the first channel.
Set the frequency value.
Set the amplitude value.
Set the DC offset value.
Select the driven channel number from the
generator.
Select the searching method for the fundamental
frequency.
Set the fundamental frequency value.
This setting is only available when Freq Lock is set
to Custom.
Select the number of samples to be acquired for
the measurement.
Enable or disable the auto input range.
Enable or disable the tracking of the first channel.
Set the input voltage range.
Refer to "Bar chart" on page 548
chart menu tree.
A
for the bar
513