Keysight U8903B User Manual page 71

Table 2-7 Marker menu description (continued)
Menu Description
Press the Movement softkey to select the marker movement type.
– Single
The active marker will move depending on the speed and direction of the knob being turned.
– Pair
The active marker will move with the reference marker.
– Bin
Movement
The active marker will move to the next/previous bin or pixel regardless of the speed of the knob.
– Peak
The active marker will move from peak to peak. This behavior is affected by the peak threshold settings.
– Harmonic
The active marker will move from harmonic to harmonic. This setting is only useful if the display option is changed to
Harmonics.
Press the Function softkey to select the marker function type.
– None
No marker function type is specified.
– Slope
Function
The slope of the current marker. The beginning point and end point taken into account for the calculation is from the
previous and subsequent point of the marker.
– PSD
The total power contained in each of the frequency bins in the band, and then dividing the result by the "effective
band width".
Press the Marker -> softkey to perform automatic adjustment of the graph left and right values in reference to the current
Marker ->
marker location. Refer to "Marker ->" on page
Press the Harmonics softkey to place the markers on the harmonic values.
Harmonics
Refer to "Harmonics" on page
Press the Rdg at Mkr softkey to enable or disable the readings at the marker.
Rdg at Mkr
You can choose to have the active marker readings to be at the top left corner of the graph, or at the marker location itself.
When marker table is enabled, the marker readings at the marker location are automatically hidden.
Keysight U8903B User's Guide
72 for more information.
73 for more information.
Operation and Features 2
71