Smpte Imd Waveforms (1:1/4:1/10:1); Figure 3-13 Analog Generator > Waveform Config Menu Page (Smpte 1:1 Waveform); Figure 3-14 Digital Generator > Waveform Config Menu Page (Smpte 1:1 Waveform) - Keysight U8903B User Manual

3 Audio Generator Functions

SMPTE IMD waveforms (1:1/4:1/10:1)

SMPTE IMD is a signal which is the linear combination of two sine waveforms. The SMPTE
IMD waveforms conform to the SMPTE standard RP120-1983 for testing intermodulation
distortion. For SMPTE IMD 1:1, the lower frequency sine wave is linearly combined in 1:1
amplitude ratio with the upper frequency sine wave. For SMPTE IMD 4:1, the lower
frequency sine wave is linearly combined in 4:1 amplitude ratio with the upper frequency
sine wave. For SMPTE IMD 10:1, the lower frequency sine wave is linearly combined in 10:1
amplitude ratio with the upper frequency sine wave.
SMPTE IMD waveform mode is applicable for the analog, digital, and Bluetooth generator.
The waveform configuration for SMPTE 1:1 waveform is displayed as shown in Figure 3-13,
Figure 3-14, and Figure 3-15 for both the analog, digital, and Bluetooth generator
respectively.
Figure 3-13
Figure 3-14
108
Analog Generator > Waveform Config menu page (SMPTE 1:1 waveform)
Digital Generator > Waveform Config menu page (SMPTE 1:1 waveform)
Keysight U8903B User's Guide