Keysight U8903B User Manual page 485

Table A-9 Bluetooth analyzer menu tree description (continued)
Level 1 Level 2
HFP Settings
Link Config
AVRCP Log View
Channel
Bits/Sample
Wave File
Duration
Record
Show Stats
No. of Reading
Statistics
Stat 1
Stat2
Stat3
Clear
Keysight U8903B User's Guide
Level 3 Level 4
Wideband
Latency 4 to 65534
– No Transmission
– Power Saving
Retransmit
– Link Quality
– No Preference
– HV1
– HV2
– HV3
– EV3
– EV4
Packet Types
– EV5
– 2EV3
– 3EV3
– 2EV5
– 3EV5
Clear Log
Refresh Log
– Left
– Right –
– Stereo
– 8
–
– 16
1 s to 600 s
– On
–
– Off
2 to 20
– Min
– Max
– Average –
– Std Dev
– ΔMinMax
Appendixes
Description
Enable or disable the wideband speech mode in the HFP
profile connection.
Set the HFP's codec channel latency in miliseconds.
Select the HFP's codec retransmission effort.
Select the packet type used in the HFP's codec.
Clear the AVRCP operation log history.
Refresh the AVRCP operation log history.
Select the wave file channel type.
Select the wave file number of bits per sample.
Set the recording duration of the wave file.
Start recording and save the measurement into a wave
file.
Enable or disable the statistics calculation.
Set the number of readings used for the statistics
calculation.
Select the statistics calculation type.
Reset the statistics results of the current analog
analyzer.
A
485