RUN CONTROL Panel
The RUN CONTROL panel is used to start or stop signal generation, measurements, and
test sequence operations.
1
Figure 2-35
Table 2-23
Navigation and CHANNEL/DATA panels description
Key
1
On/Off
2
Stop All
Keysight U8903B User's Guide
RUN CONTROL panel
Description
Press
to start or stop the signal generation or measurements for the selected generator or
analyzer channel respectively.
Press
to start or stop the graph generation in the graph analysis mode.
Press
to start or stop the sweep in the sweep mode.
Press
to start or stop the test sequence in the test sequence application mode.
Press
to stop all generator, sweep, and test sequence operations.
Operation and Features
2
2
93