Keysight U8903B User Manual page 167

Table 3-43 Digital Generator > AES Config > Edit Bits (Professional format) menu description (continued)
Menu Description
Press the Word Length softkey to select the word length.
24 bits maximum word length
– Not indicated
– 20 bits
– 21 bits
– 22 bits
– 23 bits
Word Length – 24 bits
20 bits maximum word length
– Not indicated
– 16 bits
– 17 bits
– 18 bits
– 19 bits
– 20 bits
Press the Alignment softkey to select the alignment level.
– Not Indicated
Alignment – –18.06 dBFS
– –20 dBFS
– Reserved
Press the Multi-Channel softkey to select the multi-channel status.
Multi-Channel – Defined
– Undefined
This is only available when the multi-channel status is set to Defined.
Press the Multi-Ch Mode softkey to select the multi-channel mode.
– Mode 0
Multi-Ch Mode – Mode 1
– Mode 2
– Mode 3
– User Defined
Press the Channel Num softkey to set the channel number.
Channel Num – 1 to 16 (Defined multi-channel status)
– 1 to 128 (Undefined multi-channel status)
Press the Ref Signal softkey to select the reference signal type.
– Not a ref. signal
Ref Signal – Grade 1
– Grade 2
– Reserved
Channel Origin Press the Channel Origin softkey to set the channel origin value (4 alphanumeric digit).
Channel Dest Press the Channel Dest softkey to set the channel destination value (4 alphanumeric digit).
Press the Local Addr softkey to set the local address value.
Local Addr
– 0 to 2
Keysight U8903B User's Guide
32
–1
Audio Generator Functions 3
167