Link Configuration (Bluetooth Generator); Figure 3-60 Bluetooth Generator > Link Config Menu Page; Table 3-32 Bluetooth Generator > Link Config Menu Description - Keysight U8903B User Manual

3 Audio Generator Functions

Link Configuration (Bluetooth Generator)

The link configuration for the Bluetooth generator is displayed as shown in Figure 3-60.
When connecting the U8903B to a PC's Bluetooth using A2DP profile where the U8903B
NOTE
acts as source, initiate the connection from the PC (as sink) instead of U8903B. The
U8903B does not support the initialization of A2DP source profile connection from the
U8903B when connecting to a PC.
Figure 3-60
Table 3-32 Bluetooth Generator > Link Config menu description
Menu Description
Press the Device Scan softkey to configure the device scan settings when searching for discoverable Bluetooth devices
Device Scan
within range. Refer to "Device scan" on page
Press the Device Action softkey to configure the Bluetooth device action settings such as unpair device, profile connection,
Device Action
and others. Refer to "Device action" on page
Press the Common Settings softkey to configure the Bluetooth common settings such as profile, discoverable, and others.
Common Settings
Refer to "Common settings" on page
Press the A2DP Settings softkey to configure the Bluetooth advanced audio distribution profile settings. Refer to "A2DP
A2DP Settings
settings" on page
Press the HFP Settings softkey to configure the Bluetooth handsfree/headset profile settings. Refer to "HFP settings" on
HFP Settings
page
Press the AVRCP Log View softkey to configure the Bluetooth audio/video remote control profile operation log. Refer to
AVRCP Log View
"AVRCP log view" on page
146
Bluetooth Generator > Link Config menu page
153 for more information.
154 for more information.
156 for more information.
147 for more information.
148 for more information.
150 for more information.
Keysight U8903B User's Guide