Table 8-1 U8903B Lcd Display Description - Keysight U8903B User Manual

Table 8-1 U8903B LCD display description
Item
1 SINAD meter
2 Analyzer panel
3 Generator panel
4 Measurement setting panel
5 HP8903B settings panel
Keysight U8903B User's Guide
Description
Display the SINAD measurement mode readings.
Display the measurement results. The left panel reading shows the frequency result while the
right panel reading shows the result of the selected measurement modes. Refer to
"Measurement" on page 410 for the available measurement modes.
Display the frequency and amplitude values of the sine waveform. The highlighted generator
parameter label in red indicates the current increment parameter. You can use the up or down
arrow keys to increment/decrement the current parameter value according to the parameter
step value. Refer to "Generator" on page
Display the current measurement settings in red.
Display the current setting for input range, detector, impedance, and sweep points. If the auto
range is selected, the input range parameter will be highlighted in red.
HP8903B
412 for more information.
8
409