Keysight U8903B User Manual page 459

Table A-7 Analog analyzer menu tree description (continued)
Level 1 Level 2
Clear Filters
LPF
HPF
Filters Config
Weighting
Deemphasis
Notch Filter
Keysight U8903B User's Guide
Level 3 Description
Clear all the filter settings.
– None
– 2 kHz
– 3 kHz
– 5 kHz
– 8 kHz
– 10 kHz
– 15 kHz
Select the low-pass filter.
– 20 kHz
– 22 kHz
– 30 kHz
– 40 kHz
– 50 kHz
– 80 kHz
– Custom
– None
– 15 Hz
– 20 Hz
– 22 Hz
– 30 Hz
– 50 Hz
Select the high-pass filter.
– 70 Hz
– 100 Hz
– 200 Hz
– 300 Hz
– 400 Hz
– Custom
– None
– A
– CCIR 1k
– CCIR 2k Select the weighting filter.
– C-Message
– CCITT
– Custom
– None
– 50 μs
Select the filter de-emphasis value.
– 75 μs
– Custom
Enable or disable the notch filter.
State – Enable
– Disable
Center Freq Set the frequency of the component to be removed from the input signal.
Bandwidth Set the band width of the signal component to be removed.
Appendixes A
459