Table 3-35 Bluetooth Analyzer > Link Config > Common Settings Menu Description - Keysight U8903B User Manual

Performance audio
Hide thumbs Also See for U8903B:
Table of Contents

Advertisement

Figure 3-65
Table 3-35
Bluetooth Analyzer > Link Config > Common Settings menu description
Menu
Description
Press the Profile softkey to select the U8903B's Bluetooth card profile. There are two sets of profiles available and the
selected profile set will be accessible by the connected Bluetooth device.
– A2DP SRC, HFP AG, AVRCP TRGT
Profile
A2DP source, HFP audio gateway, AVRCP target
– A2DP SNK, HFP HF, AVRCP CTRL
A2DP sink, HFP handsfree/headset, AVRCP controller
Friendly Name
Press the Friendly Name softkey to set the friendly name of the U8903B's Bluetooth card.
Device PIN
Press the Device PIN softkey to set the passkey for the U8903B's Bluetooth card.
Press the Device Class softkey to select the device class based on the configured profile.
– Auto
When auto is set and the Bluetooth card is configured as a source profile, device class sets to 60020C (smartphone).
Device Class
When auto is set and the Bluetooth card is configured as a sink profile, device class sets to 240408
(handsfree/headset device).
– Custom
Manually set the device class.
This is only available if the Device Class is set to Custom.
Custom
Press the Custom softkey to set the device class.
Press the SSP Mode softkey to select the U8903B's Bluetooth card simple secure pairing (SSP) mode when pairing.
– Just Works
SSP Mode
Just works mode is selected when only minimal security is needed. No passkey is required during pairing.
– Man-In-The-Middle
Man-in-the-middle mode is selected when maximum security is needed. A passkey is required during pairing.
Press the Auto Pair softkey to enable or disable the auto-pairing function of the U8903B's Bluetooth card with a remote
Auto Pair
device.
Press the Discoverable softkey to enable or disable the discoverability function of the U8903B's Bluetooth card by a
Discoverable
remote device.
Keysight U8903B User's Guide
Bluetooth Analyzer > Link Config > Common Settings menu page 3
Audio Generator Functions
3
151

Advertisement

Table of Contents
loading

Table of Contents