Figure 3-12 Bluetooth Generator > Waveform Config Menu Page (Dual Waveform); Table 3-6 Analog/Digital/Bluetooth Generator > Waveform Config Menu Description (Dual Waveform) - Keysight U8903B User Manual

Figure 3-12
Table 3-6 Analog/Digital/Bluetooth Generator > Waveform Config menu description (dual waveform)
Menu Description
Amplitude can be expressed as Vrms, Vpeak, Vpp, dBV, dBu, and dBm for the analog generator.
Amplitude Amplitude can be expressed as FFS, dBFS, or %FS for the digital and Bluetooth generator.
For a perfect sine waveform without any DC offset, Vpp is twice Vpeak and Vrms is equivalent to Vpeak/√2.
Frequency 1 Frequency 1 refers to the frequency for the first sine component.
Frequency 2 Frequency 2 refers to the frequency for the second sine component.
DC Offset DC Offset refers to the DC component of the waveform.
Ratio Ratio refers to the amplitude ratio of the second sine component over the first sine component.
Summation refers to the method to sum up two levels.
– RSS
The amplitude displayed is the Root Sum Square (RSS) summation result of the two levels. The analyzer will read the
Summation same amplitude set at the generator regardless of tone ratio.
– Linear
The amplitude displayed is the linear summation result of the two levels. The level of each tone can be easily calculated
back from the tone ratio.
Keysight U8903B User's Guide
Bluetooth Generator > Waveform Config menu page (dual waveform)
Audio Generator Functions 3
107