Appendix 14: Test Sequence Menu Tree; Table A-14 Test Sequence Menu Tree Description - Keysight U8903B User Manual

Appendix 14: Test Sequence Menu Tree

Table A-14 Test sequence menu tree description
Tab Level 1
New Project
Open Project
Save Project
Project
Properties
Clear
Save
Report
Properties
Keysight U8903B User's Guide
Level 2 Level 3
– On
Prompt DUT ID
– Off
Prompt Msg
– On
Pass/Fail Msg
– Off
Pass Message
Fail Message
– Enable
Auto Save
– Disable
– Docx
Format
– Html
– Timestamp
Name Option – Numeric
– Prompt
Prefix
Select
Location
New Folder
Appendixes
Description
Create a new project.
Load a project from a file.
Refer to "Append ix 13: Recall Menu Tree" on
page 494 for the recall menu tree.
Save the project to a file.
Refer to "Append ix 12: Save Menu Tree" on
page 493 for the save menu tree.
Enable or disable the prompt for device ID (device
serial number) at the start of a test sequence.
Set the prompt message.
This setting is only available when Prompt DUT ID
is enabled.
Enable or disable the on-screen message dialog
box that can be displayed at the end of a test
sequence. Press Enter to close the dialog box.
Edit the pass message.
This setting is only available when Pass/Fail Msg
is enabled.
Edit the fail message.
This setting is only available when Pass/Fail Msg
is enabled.
Clear all the report data.
Save the report to a DOCX file format.
Refer to "Append ix 12: Save Menu Tree" on
page 493 for the save menu tree.
Enable or disable saving the report automatically
at the end of a test sequence.
Select the report file format to be saved.
Select the naming convention of the file name for
the automatically saved report.
Set the prefix for the file name.
Select the folder for the automatically saved
report.
Create a new folder at the current directory or
folder.
A
495