Keysight U8903B User Manual page 496

A Appendixes
Table A-14 Test sequence menu tree description (continued)
Tab Level 1
Enable
Add Test Sequence
Delete Test Sequence
Save
Test
Edit
Properties
Add Measurement
Edit
IO Configuration
Settings: Output
Configuration (Analog)
496
Level 2 Level 3
– On
– Off
New
Saved
Move
Copy
Paste
Name
Paste
– None (External)
Channels – 1
– 2
– Bal
– UnBal
Connector
– Com
– IEC60268
– For Bal, Com, and
IEC60268
– 600 Ω
– 100 Ω
– 40 Ω
Impedance
– For UnBal
– 600 Ω
– 50 Ω
– 20 Ω
– Pin 2
IEC60268
– Pin 3
– Float
Ground
– Ground
Description
Enable or disable the selected test sequence.
Add a new test sequence.
Delete the selected test sequence.
Save the test sequence to a file.
Refer to "Append ix 12: Save Menu Tree" on
page 493 for the save menu tree.
Move the selected test sequence.
Copy the selected test sequence.
Paste a copied test sequence after the selected
test sequence.
Set the test sequence name.
Add measurements to the selected test sequence.
Refer to "Add Measurement" on page
the list of test measurements.
Paste a copied measurement after the IO
configuration. The IO Configuration cannot be
moved or copied.
Select the number of output channels in use.
Select the output connector type.
Select the output impedance value.
Select the additional 10 Ω output series
resistance for pin 2 or 3 of the XLR connector in
the common IEC 60268 configuration.
This setting is only available when the output
connector type is set to IEC 60268.
Select the grounding type.
Keysight U8903B User's Guide
500 for