Table A-18 Measurement Settings > Snr Menu Tree Description - Keysight U8903B User Manual

SNR
Table A-18 Measurement settings > SNR menu tree description
Tab Level 1
Waveform
Output
SNR
(Signal Generation)
Waveform Config
SNR Mode
SNR Delay
SNR Freq Lock
(Signal Analysis)
Fund Freq
Harmonic Cnt
Keysight U8903B User's Guide
Level 2 Level 3
– Sine
– Variable phase
– Square
– Arbitrary
– Enable
Track 1st Ch
– Disable
Frequency
Amplitude
DC Offset
Phase->1st Ch
– Fast
– Standard
– Auto
– Gen Lock
– Custom
Appendixes
Description
Select the waveform type.
Select the output channel.
Enable or disable the tracking of the first channel.
Set the frequency value.
Set the amplitude value.
Set the DC offset value.
Set the phase value. This setting is only available
when channel 2 is selected.
Select the SNR measurement mode.
Set the SNR delay.
This setting is only available when SNR Mode is
set to Standard.
Select the searching method for the fundamental
frequency.
This setting is only available when SNR Mode is
set to Fast.
Set the fundamental frequency value.
This setting is only available when SNR Mode is
set to Fast and Freq Lock is set to Custom.
Set the number of harmonics order to be removed.
This setting is ony available when SNR Mode is
set to Fast.
A
507