Wave File (Analog, Digital, And Bluetooth Analyzer) - Keysight U8903B User Manual

Wave File (Analog, Digital, and Bluetooth Analyzer)

The U8903B allows you to record and save the input measurement signal into a wave file.
The recorded wave file can be used as a test signal. The wave file settings for analog,
digital, and Bluetooth analyzer is displayed as shown in Figure 4-67, Figure 4-68, and
Figure 4-69 respectively.
It is recommended to use fixed input range for analog wave file saving to ensure that the
NOTE
recorded signal's amplitude is closer to the measured signal. The selected range should be
close to the measured signal's amplitude.
Figure 4-67
Figure 4-68
Keysight U8903B User's Guide
Analog Analyzer > Wave File menu page
Digital Analyzer > Wave File menu page
Audio Analyzer Measurement Functions 4
255