Table 2-18 System > I/O > Lan Settings Menu Description - Keysight U8903B User Manual

In the Lan Settings menu page, you can reset the LAN, change the hostname, and switch
between automatic or manual configuration mode as shown in Figure 2-28.
Figure 2-28
Table 2-18 System > I/O > Lan Settings menu description
Menu Description
Reset Press the Reset softkey to reset the LAN settings.
Hostname Press the Hostname softkey to set the LAN hostname.
Press the Config Mode softkey to select the LAN configuration mode.
Config Mode – Auto
– Manual
Press the IP Address softkey to set the LAN IP address.
IP Address
This setting is only available when the LAN configuration mode is set to Manual.
Press the Subnet mask softkey to set the LAN subnet mask address.
Subnet mask
This setting is only available when the LAN configuration mode is set to Manual.
Press the Gateway softkey to set the LAN gateway address.
Gateway
This setting is only available when the LAN configuration mode is set to Manual.
Press the DNS 1 softkey to set the LAN DNS 1 address.
DNS 1
This setting is only available when the LAN configuration mode is set to Manual.
Press the DNS 2 softkey to set the LAN DNS 2 address.
DNS 2
This setting is only available when the LAN configuration mode is set to Manual.
Update
Refer to "Update the U8903B" on page 46.
Keysight U8903B User's Guide
System > I/O > Lan Settings menu page 1
Operation and Features 2
85