Measurement Settings; Table 5-9 Graph Analysis > Measurement Menu Description - Keysight U8903B User Manual

Performance audio

Hide thumbs Also See for U8903B:

Table of Contents

Graph Analysis

Measurement Settings

The U8903B allows you to observe up to two measurements running simultaneously in the

graph analysis mode. The measurements will be displayed at the bottom of the graph. The

measurement settings for graph analysis is displayed as shown in Figure 5-15.

Graph Analysis > Measurement menu description

Press the Enabled softkey to enable or disable the measurements in the graph. If measurement is not required, disable the

measurements for better performance.

Press the Measurement 1 softkey to configure the measurement 1 parameters. Refer to "Measurement 1/

Measurement 1

Measurement 2" on page

Press the Measurement 2 softkey to configure the measurement 2 parameters. Refer to "Measurement 1/

Measurement 2

Measurement 2" on page

Graph Analysis > Measurement menu page

for more information.

for more information.

Keysight U8903B User's Guide

Table of Contents