Table 7-60 Tsa > Project > Test > Measurement > Settings > Result (Graph) Menu - Keysight U8903B User Manual

Table 7-60 TSA > Project > Test > Measurement > Settings > Result (graph) menu description
Menu Description
Enable Press the Enable softkey to enable or disable the selected result tab.
Add Resul t Press the Add Resul t softkey to add a new result tab to the measurement.
Delete Result Press the Delete Result softkey to delete the selected result tab from the measurement.
Press the Save Data softkey to save the selected result data to a CSV file format in the internal storage or external USB
Save Data
flash storage. Refer to "Save" on page
Press the Ed it Limits softkey to configure the limits settings.
– Trace
Select the trace channel number or the trace type (POLQA measurement)
– Limit Type
Select Upper or Lower as the limit type.
– Track 1st
If Track 1st trace is enabled, the channel 1 limits settings will be copied to the other channels and the limits settings for
the other channels cannot be edited. Any changes made to the channel 1 limits settings will be reproduced in the other
channels limits settings. Disable the Track 1st trace to set the individual channels limits.
– Limit
Enable or disable the limit.
– Points
– Point No
Set the point number.
Ed it Limits
– X
Set the X-axis value for the selected point number.
– Y
Set the Y-axis value for the selected point number.
– Add Point
Add a limit point.
– Remove Point
Remove the selected limit point.
– Clear Points
Clear all the limit points.
– Load Points
Load limit points from a file. Refer to "Recall" on page
– Save Points
Save the selected limit points to a file. Refer to "Save" on page
Keysight U8903B User's Guide
94 for the Save menu page.
95 for the Recall menu page.
94 for the Save menu page.
Test Sequence Application 7
401