Figure 3-2 Digital Generator Menu Page; Table 3-2 Digital Generator Menu Description - Keysight U8903B User Manual

3 Audio Generator Functions
Figure 3-2
Table 3-2 Digital Generator menu description
Menu Description
Press the Waveform softkey to display the list of available digital generator waveform types. Select the desired waveform
Waveform
from the drop-down list.
Press the Waveform Config softkey to set the current active waveform configuration such as frequency, amplitude, and
Waveform Config
others. Refer to "Waveform Configuration" on page
Press the Output Config softkey to set the output configurations such as the connector type, impedance, and others. Refer
Output Config
to "Output Configuration (Digital Generator)" on page
Press the DSI Config softkey to set the DSI output configurations such as the format, resolution, and others. Refer to "DSI
DSI Config
Output Configuration (Digital Generator)" on page
Press the AES3/SPDIF softkey to set the AES3/SPDIF output configurations such as the level, resolution, and others. Refer
AES3/SPDIF
to "AES3/SPDIF Output Configuration (Digital Generator)" on page
Press the References softkey to configure the output references settings that are used in the unit conversion. Refer to
References
"References (Digital and Bluetooth Generator)" on page
100
Digital Generator menu page
102 for more information.
143 for more information.
157 for more information.
159 for more information.
172 for more information.
Keysight U8903B User's Guide