Table A-17 Measurement Settings > Phase Menu Tree Description - Keysight U8903B User Manual

A Appendixes
Phase
Table A-17 Measurement settings > Phase menu tree description
Tab Level 1
Waveform
Output
Phase
Waveform Config
(Signal Generation)
Waveform Config
Ref Channel
Sample Size
Phase
(Signal Analysis)
Input Range
Phase
506
Level 2 Level 3
– Sine
– Variable Phase
– Square
– Arbitrary
– Enable
Track 1st Ch
– Disable
Frequency
Amplitude
DC Offset
Phase->1st Ch
– 2048
– 4096
– 8192
– 16384
– 32768
– 65536
– 131072
– 262144
– 524288
– 1M
– 2M
– Enable
Track 1st Ch
– Disable
Voltage Range
Description
Select the waveform type.
Select the output channel.
Enable or disable the tracking of the first channel.
Set the frequency value.
Set the amplitude value.
Set the DC offset value.
Set the phase value. This setting is only available
when channel 2 is selected.
Set the reference channel number.
Select the number of samples to be acquired for
the measurement.
Enable or disable the tracking of the first channel.
Set the input voltage range.
Refer to "Bar chart" on page 548
chart menu tree.
Keysight U8903B User's Guide
for the bar