Keysight U8903B User Manual page 152

3 Audio Generator Functions
Table 3-35 Bluetooth Analyzer > Link Config > Common Settings menu description (continued)
Menu Description
Press the Connectable softkey to enable or disable the connectability function of the U8903B's Bluetooth card by a remote
Connectable
device.
Press the Loopback softkey to enable or disable the integrated interchip sound (I2S) audio loopback function. This is only
Loopback
available if the HFP profile is connected.
Press the Link Status softkey to enable or disable the link status of the U8903B's Bluetooth card. This is only available if
Link Status
the HFP profile or A2DP profile is connected.
Press the RF Port softkey to select the U8903B's Bluetooth card RF port connector.
RF Port – RF1
– RF2
152 Keysight U8903B User's Guide