Keysight U8903B User Manual page 349

Table 7-37 Stepped Frequency Sweep > Signal Analysis settings menu description (continued)
Menu Description
Press the LPF softkey to select the low-pass filter.
– None
– 2 kHz
– 3 kHz
– 5 kHz
– 8 kHz
– 10 kHz
LPF – 15 kHz
– 20 kHz
– 22 kHz
– 30 kHz
– 40 kHz
– 50 kHz
– 80 kHz
– Custom
Press the HPF softkey to select the high-pass filter.
– None
– 15 Hz
– 20 Hz
– 22 Hz
– 30 Hz
HPF – 50 Hz
– 70 Hz
– 100 Hz
– 200 Hz
– 300 Hz
– 400 Hz
– Custom
Press the Weighting softkey to select the weighting filter.
– None
– A
– CCIR 1k
Weighting
– CCIR 2k
– CCITT
– C-Message
– Custom
Press the Deemphasis softkey to select the de-emphasis filter.
– None
Deemphasis – 50 μs
– 75 μs
– Custom
Keysight U8903B User's Guide
Test Sequence Application 7
349