Table A-20 Measurement Settings > Dc Level Menu Tree Description - Keysight U8903B User Manual

A Appendixes
DC level
Table A-20 Measurement settings > DC Level menu tree description
Tab Level 1
Waveform
Output
DC Level
(Signal Generation)
Waveform Config
Sample Size
DC Level
(Signal Analysis)
Input Range
DC Level
512
Level 2 Level 3
– Sine
– Arbitrary
– Enable
Track 1st Ch
– Disable
Frequency
Amplitude
DC Offset
– 2048
– 4096
– 8192
– 16384
– 32768
– 65536
– 131072
– 262144
– 524288
– 1M
– 2M
– On
Auto Range
– Off
– Enable
Track 1st Ch
– Disable
Voltage Range
Description
Select the waveform type.
Select the output channel.
Enable or disable the tracking of the first channel.
Set the frequency value.
Set the amplitude value.
Set the DC offset value.
Select the number of samples to be acquired for
the measurement.
Enable or disable the auto input range.
Enable or disable the tracking of the first channel.
Set the input voltage range.
Refer to "Bar chart" on page 548
chart menu tree.
Keysight U8903B User's Guide
for the bar