Keysight U8903B User Manual page 451

Table A-7 Analog analyzer menu tree description (continued)
Level 1 Level 2
Functions
Unit
(AC Voltage)
Format
Set to 0dB
Set result as ref. from
Functions
(AC Voltage)
Ref. Level
Ref. Imp
Cal SPL
Detector
Unit
Format
Functions
(DC Voltage)
Set result as ref. from
Ref. Level
Keysight U8903B User's Guide
Level 3 Description
– dBg
– dBm
– dBr
– dBu
– dBV
Select the unit type.
– W
– V
– ΔV
– dBSPL
– x
– Off
– Logarithmic
Select the reading format of the returned measurement reading.
– Linear
– Delta
Store the measured level as the reference level, and set the measurement
reading format to Logarithmic.
Store the measurement result from the selected channel as the reference
Channels 1 to 8
frequency.
Set the reference level value.
There is only one reference level for each channel.
Set the reference impedance value.
This setting is only available when the unit is set to W.
Set the calibration level value.
This setting is only available when the unit is set to dBSPL.
– RMS
Select the AC level detection type.
– Pk-Pk
– V
– ΔV Select the unit type.
– x
– Off
– Linear Select the reading format of the returned measurement reading.
– Delta
Store the measurement result from the selected channel as the reference
Channels 1 to 8
frequency.
Set the reference level value.
There is only one reference level for each channel.
Appendixes A
451