2
Operation and Features
Scale
The Scale menu page allows you to perform autoscaling to automatically scale the display
according to the signal, or to autoscale the X-axis or Y-axis.
The Scale menu page is only available in the graph analysis mode.
NOTE
Figure 2-18
Table 2-10
Scale menu description
Menu
Description
AutoScale
Press the AutoScale softkey to perform autoscaling on the X-axis and Y-axis.
Press the AutoScale X softkey to perform autoscaling on the X-axis by searching for the most optimum scale (left and right
AutoScale X
values) for the X-axis based on the data being displayed in the graph.
Press the AutoScale Y softkey to perform autoscaling on the Y-axis by searching for the most optimum scale (top and
AutoScale Y
bottom values) for the Y-axis based on the data being displayed in the graph.
74
Scale menu page
Keysight U8903B User's Guide