Filters Configuration (Analog Analyzer); Table 4-22 Analog Analyzer > Filter Config Menu Description - Keysight U8903B User Manual

Filters Configuration (Analog Analyzer)

Filters are used to bandwidth limit the input signals before applying a measurement
function. The filter configuration for the analog analyzer is displayed as shown in
Figure 4-51.
Figure 4-51
Table 4-22 Analog Analyzer > Filter Config menu description
Menu Description
Clear Fil ters Press the Clear Filters softkey to clear all the filter settings.
Press the LPF softkey to select the low-pass filter.
– None
– 2 kHz
– 3 kHz
– 5 kHz
– 8 kHz
– 10 kHz
LPF – 15 kHz
– 20 kHz
– 22 kHz
– 30 kHz
– 40 kHz
– 50 kHz
– 80 kHz
– Custom (Refer to "Append ix 18: User-defined Filter File Format" on page
Keysight U8903B User's Guide
Analog Analyzer > Filter Config menu page
Audio Analyzer Measurement Functions
561 for more information.)
4
231