Trace Settings; Table 5-4 Graph Analysis > Trace Settings Menu Description - Keysight U8903B User Manual

5 Graph Analysis

Trace Settings

The trace settings for graph analysis is displayed as shown in Figure 5-4.
Figure 5-4
Table 5-4 Graph Analysis > Trace Settings menu description
Menu Description
Active Trace Press the Active Trace softkey to select the active trace number.
Source Press the Source softkey to select data source of the active trace from the available channels, traces, files, and memory.
Press the Enabled softkey to enable or disable the active trace data. You can also access this function by pressing the Shift
Enabled
key and the trace number key on the CHANNEL/DATA panel.
Memory Press the Memory softkey to save or load a trace. Refer to "Memory" on page
Math Press the Math softkey to apply a math function. Refer to "Math" on page
Press the Unit softkey to select the trace unit type.
– V
– dBV
Unit – dBu
– W
– dBm
– dBSPL
Press the Persistence softkey to configure the persistence settings. Refer to "Persistence" on page
Persistence
information.
266
Graph Analysis > Trace Settings menu page 1
268 for more information.
269 for more information.
270 for more
Keysight U8903B User's Guide