Plot View; Table 6-4 Sweep > Plot View Menu Description - Keysight U8903B User Manual

Plot View

The sweep plot view menu page is displayed as shown in Figure 6-5.
Press
mode.
Figure 6-5
Table 6-4 Sweep > Plot View menu description
Menu Description
Press the Axis Settings softkey to configure the sweep axis settings.
Axis Settings
Refer to "Axis settings" on page
Press the Plot Settings softkey to configure the sweep trace settings.
Plot Settings
Refer to "Plot settings" on page
Press the Ed it Points softkey to configure the sweep points.
Edit Points
Refer to "Ed it Points" on page
Press the Save Pts softkey to save the sweep points to a file.
Save Pts
Refer to "Save" on page
Keysight U8903B User's Guide
on the RUN CONTROL panel to start or stop the sweep in the sweep
Sweep > Plot View menu page
286 for more information.
287 for more information.
289 for more information.
94 for the Save menu page.
Sweep Function 6
285