Measurement Configuration (Bluetooth Analyzer); Table 4-29 Bluetooth Analyzer > Meas Config Menu Description - Keysight U8903B User Manual

4 Audio Analyzer Measurement Functions

Measurement Configuration (Bluetooth Analyzer)

The measurement configuration for Bluetooth analyzer is displayed as shown in
Figure 4-58.
Figure 4-58
Table 4-29 Bluetooth Analyzer > Meas Config menu description
Menu Description
Press the Coupling softkey to select the coupling type.
– DC
DC coupling allows both AC and DC input signals to pass through to the Bluetooth analyzer and to be measured down to
Coupling 0 Hz. This setting should be selected when making DC voltage measurements.
– AC
AC coupling blocks the DC component of the input signal. This setting should be selected when you need to measure
only the AC component of a signal. For example, when you are making rms or peak-to-peak voltage measurement.
Press the Sample Size softkey to select the sample size. The sample size is the number of data points acquired for the
measurement. The higher the sample size, the higher the accuracy of the measurement result.
– 2048
– 4096
– 8192
– 16384
Sample Size
– 32768
– 65536
– 131072
– 262144
– 524288
Press the Mov Average softkey to set the average points. Higher number of average points should be used when the
analyzed data is noisy.
Mov Average
– 1 to 20 points
242
Bluetooth Analyzer > Meas Config menu page
Keysight U8903B User's Guide