Configuration 5 - Keysight U8903B User Manual

A Appendixes

Configuration 5

This configuration is similar to configuration 3, except that the DUT uses the U8903B
internal reference clock source as the reference clock.
Press
mode, and press
DUT
Figure A-8
1 Press Input Config > Connector, and select DSI as the digital analyzer input type.
2 At the digital generator, press DSI Config > Master Clock, and select On to turn on the
master clock.
3 Press DSI Config > W/Bclk Dir, and select Out as the word and bit clock direction.
570
on the FUNCTION panel to switch between audio generator or audio analyzer
on the FUNCTION panel to switch to digital interface.
Master clock
Data
Frame Sync
Bit clock
DSI test configuration 5
Pin 1
Pin 9
Pin 10
Pin 11
U8903B
Keysight U8903B User's Guide