Filters Configuration (Bluetooth Analyzer); Table 4-25 Bluetooth Analyzer > Filter Config Menu Description - Keysight U8903B User Manual

4 Audio Analyzer Measurement Functions

Filters Configuration (Bluetooth Analyzer)

Filters are used to bandwidth limit the input signals before applying a measurement
function. The filter configuration for the Bluetooth analyzer is displayed as shown in
Figure 4-54.
Figure 4-54
Table 4-25 Bluetooth Analyzer > Filter Config menu description
Menu Description
Clear Fil ters Press the Clear Fil ters softkey to clear all the filter settings.
Press the LPF softkey to select the low-pass filter.
– None
LPF – 15 kHz
– 20 kHz
– Custom (Refer to "Append ix 18: User-defined Filter File Format" on page
Press the HPF softkey to select the high-pass filter.
– None
– 22 Hz
HPF
– 100 Hz
– 400 Hz
– Custom (Refer to "Append ix 18: User-defined Filter File Format" on page
Press the Weighting softkey to select the weighting filter.
– None
– A
– CCIR 1k
Weighting
– CCIR 2k
– CCITT
– C-Message
– Custom (Refer to "Append ix 18: User-defined Filter File Format" on page
236
Bluetooth Analyzer > Filter Config menu page
561 for more information.)
561 for more information.)
561 for more information.)
Keysight U8903B User's Guide