Keysight U8903B User Manual page 397

Table 7-58 Voice Quality > Signal Generation and Analysis settings menu description (continued)
Menu Description
Press the Reference softkey to set the reference source configuration.
– Source
Select the reference source.
– File
– Generator
– Reference File
Use the Reference File as the comparison file if the Source is set to File.
Use the following Reference File options as the comparison file if the Source is set to Generator:
– Playback File
– Recorded
– Custom File
– Playback File
This setting is only available when the Reference Source is set to Generator. Set the playback file to be used as the
comparison file if Reference File is set to Playback File. Set the playback file to be recorded as the comparison file if
Reference File is set to Recorded. Set the playback file to be recorded and the Custom File to be used as the comparison
file if Reference File is set to Custom.
– Custom File
Set the custom file to be used as the comparison file. This setting is only available when Reference Source is set to
Generator and Reference File is set to Custom.
– Rec Channel
Set the channel number to be recorded from. This setting is only available when Source is set to Generator and
Reference
Reference File is set to Recorded.
– Rec Duration
Set the recording duration to be recorded. This setting is only available when Source is set to Generator and Reference
File is set to Recorded.
– Rec Step
Set the start recording type. This setting is only available when Source is set to Generator and Reference File is set to
Recorded.
– Auto
– Delay
– Prompt
– Rec Delay
Set the delay time before a recording is performed. This setting is only available when Source is set to Generator,
Reference File is set to Recorded, and Rec Step is set to Delay.
– Rec to File
Enable or disable exporting the recording function. This setting is only available when Source is set to Generator and
Reference File is set to Recorded.
– Yes
– No
– Rec File
Set the file path for the exported recording destination. This setting is only available when Source is set to Generator,
Reference File is set to Recorded, and Rec To File is set to Yes.
Keysight U8903B User's Guide
Use the Reference File as the comparison file.
Use the Reference File options to determine the comparison file.
Use the Playback File as the comparison file.
Use the Recorded Playback File as the comparison file.
Use the Custom File as the comparison file.
Start the recording automatically.
Start the recording after a delay.
Start the recording after the user presses the Enter key to proceed in the confirmation prompt.
Export the recording to the file path specified in Rec File.
Do not export the recording.
Test Sequence Application 7
397