Keysight U8903B User Manual page 501

Table A-14 Test sequence menu tree description (continued)
Tab Level 1
Measurement Properties
Keysight U8903B User's Guide
Level 2 Level 3
Name
Add Sub-Step
Sub-Steps: RunIO
Configuration
Edit
Enable
Add Sub-Step
Delete Sub-Step
Sub-Steps:
Delay
Edit
Settings
Properties
Enable
Add Sub-Step
Delete Sub-Step
Edit
Sub-Steps:
Prompt
Settings
Appendixes
Description
Rename the selected measurement.
Add sub-step to the list.
– Delay
– Prompt
– Sent SCPI
Move the RunIO Configuration sub-step in the list.
Enable or disable the delay sub-step.
Add sub-step to the list.
– Delay
– Prompt
– Sent SCPI
Delete the selected sub-step.
Move or copy the selected sub-step, or paste a
copied sub-step after the selected sub-step.
Configure the delay sub-step settings.
– Delay
Set the delay time in seconds.
Rename the delay sub-step name.
Enable or disable the prompt sub-step.
Add sub-step to the list.
– Delay
– Prompt
– Sent SCPI
Delete the selected sub-step.
Move or copy the selected sub-step, or paste a
copied sub-step after the selected sub-step.
– Message
Set the prompt message at the lower half of
the main display.
– Prompt Icon
Select the prompt icon to be displayed.
– None
– Hand
– Question
– Exclamation
– Asterisk
– Dialog Settings
Add additional settings to the prompt window.
– Timeout
– Cancel Button
– Timeout
Set the prompt timeout value in seconds.
A
501