Aes3/Spdif Output Configuration (Digital Generator); Figure 3-70 Digital Generator > Aes Config Menu; Table 3-40 Digital Generator > Aes Config Menu Description - Keysight U8903B User Manual

AES3/SPDIF Output Configuration (Digital Generator)

The AES3/SPDIF output configuration for the digital generator is displayed as shown in
Figure 3-70.
Figure 3-70
Table 3-40 Digital Generator > AES Config menu description
Menu Description
Level Press the Level softkey to set the output voltage level.
Press the Resolution softkey to set the audio resolution value.
Resolution
– 8 to 24
Press the Valid ity Bit softkey to select the vailidty bit.
Valid ity Bit – Set
– Clear
Press the Mode softkey to select the AES3/SPDIF format.
Mode – Consumer
– Professional
Press the Status Bits softkey to select the status bits type.
Status Bits – Channel
– User
Press the Ed it Bits softkey to configure the bits according to the format selected. Refer to "Ed it Bits (Consumer
Ed it Bits
format)" on page
Clear Bits Press the Clear Bits softkey to clear all the bits.
Press the Save File softkey to save the bits to a file. Refer to "Save" on page
Save File
menu page.
Press the Load File softkey to load the bits from a file. Refer to "Recall" on page
Load File
menu page.
Keysight U8903B User's Guide
Digital Generator > AES Config menu page 1
160 and "Ed it Bits (Professional format)" on page
Audio Generator Functions
165 for more information.
94 for more information on the Save
95 for more information on the Recall
3
159