Table A-22 Measurement Settings > Smpte Imd Menu Tree Description - Keysight U8903B User Manual

A Appendixes
SMPTE IMD
Table A-22 Measurement settings > SMPTE IMD menu tree description
Tab Level 1
Waveform
Output
SMPTE IMD
(Signal Generation)
Waveform Config
Freq Lock
Upper Freq
Lower Freq
SMPTE IMD
(Signal Analysis)
Sample Size
Input Range
SMPTE Ratio
514
Level 2 Level 3
– SMPTE 1:1
– SMPTE 4:1
– SMPTE 10:1
– Enable
Track 1st Ch
– Disable
Upper Freq
Lower Freq
Amplitude
DC Offset
Gen Lock
Custom
– 2048
– 4096
– 8192
– 16384
– 32768
– 65536
– 131072
– 262144
– 524288
– 1M
– 2M
– On
Auto Range
– Off
– Enable
Track 1st Ch
– Disable
Voltage Range
Description
Select the waveform type.
Select the output channel.
Enable or disable the tracking of the first channel.
Set the upper frequency value.
Set the lower frequency value.
Set the amplitude value.
Set the DC offset value.
Select the searching method for the upper and
lower frequencies.
Set the upper fundamental frequency value.
This setting is only available when Freq Lock is set
to Custom.
Set the lower fundamental frequency value.
This setting is only available when Freq Lock is set
to Custom.
Select the number of samples to be acquired for
the measurement.
Enable or disable the auto input range.
Enable or disable the tracking of the first channel.
Set the input voltage range.
Refer to "Bar chart" on page 548
chart menu tree.
Keysight U8903B User's Guide
for the bar