Keysight U8903B User Manual page 491

Table A-11 Sweep function menu tree description (continued)
Level 1 Level 2
Axis Settings
Plot View
Plot Settings
Keysight U8903B User's Guide
Level 3 Level 4
– Primary
Active Axis
– Secondary
Left
Right
Top
Bottom
– Linear
X-Scale
– Log
– Linear
Y-Scale
– Log
Data Channel
– S: <sweep
parameter>
– F1: <measurement
function 1>
– F2: <measurement
Y Data
function 2>
– F3: <measurement
function 3>
– F4: <measurement
function 4>
– S: <sweep
parameter>
– F1: <measurement
function 1>
– F2: <measurement
Y2 Data
function 2>
– F3: <measurement
function 3>
– F4: <measurement
function 4>
– S: <sweep
parameter>
– F1: <measurement
function 1>
– F2: <measurement
X Data
function 2>
– F3: <measurement
function 3>
– F4: <measurement
function 4>
– On
Wrap Phase
– Off
Appendixes
Description
Select the active axis.
Set the left axis value.
Set the right axis value.
Set the top axis value.
Set the bottom axis value.
Select the X-axis scale type.
Select the Y-axis scale type.
Select the trace data channel number to be
plotted.
Select the Y-axis trace data source.
Select the second Y-axis trace data source.
Select the X-axis trace data source.
Enable of disable the wrap phase.
A
491