Signal analysis
The multitone analyzer signal analysis settings menu page is displayed as shown in
Figure 7-36.
Figure 7-36
Table 7-35
Multitone Analyzer > Signal Analysis settings menu description
Menu
Description
Press the Input Range softkey to configure the input range settings.
– Track 1st Ch
If Track 1st Ch is enabled, all the other channels will be set to follow the channel 1 range setting. Any changes made to
Input Range
channel 1 range setting will be reproduced in the other channels. Disable the Track 1st Ch to set the individual
channels.
– Voltage Range
Set the input voltage range.
Keysight U8903B User's Guide
Multitone Analyzer > Signal Analysis settings menu page
Test Sequence Application
7
345